TRLIFE 5200mAh Bicycle Light 3*L2/T6 USB Rechargeable Bike Lamp IPX5 Waterproof LED Headlight as Power Bank MTB Bike Accessories

TIPS

If you receive the product and it does not work, please note that the product cannot be disassembled, otherwise it will cause a short circuit because the line is blocked. Please follow the following operations to test:
①You need to use the original data cable to charge for 6-8 hours. After charging for half an hour, check whether the switch indicator is bright red or green. As the light is relatively dark, it is recommended to check in a darker place;
②If it still doesn’t work, you need to try a charger that can work normally, it must be a 5V charger;
③When the battery is used up, it should not be left for a long time before charging. This will cause the product to crash and cannot be charged. After the above check, it still can’t work, please contact our customer service, we will reply to your questions within 24 hours.
④Bike light generate heat during use is a normal phenomenon. If temperature is too high, please stop using the bike light till it cool down.
If bike light is not used for a long time, please charge it every three months.
Do not irradiate to the eyes. Keep away from flammable and explosive objects.
The waterproof rate is IPX5. Do not soak the bike light into water.
Properly place the bike light. Out of children’s reach to avoid accide

Feature

built-in battery, small and exquisite, use as bike light and flashlight, made from aluminum alloy, good heat dissipation, built-in overcharge and over discharge IC, USB charging, 360 degree rotation bracket, Power capacity and charging indication, 3 switch mode

Product Parameters

Model number: NX2/3 Bike Light
Irradiation distance: above 500 meters
LED: 2/3 T6
Bracket: 360 degree rotation bracket
Charge and discharge protection: built-in overcharge and over discharge IC. Extending battery life
Size: 120mm (Lengh), 40mm(width), 25mm(height)
3 switch Mode: High / Middle / Strobe
Working voltage: 3.7V
Product color: Black
Light color: White
LED color temperature: 7500K
Product Material: aluminium alloy
continuous working time：3 hours on high mode
Power supply: built-in one 18650 battery
Surface craft: Abrasion resistant anodizing
Switch type: Button Switch on lamp head

only 3 LEDs can be used as power bank

Packet List

Please refer to the packet list of the drawing,if you choose option with taillight,we will send together

Double 2T6 or 3T6 lamp beads

Battery capacity

3 LED L2 10 hours: battery is 5200 mAh, can work in high light mode for 10 hours
3 LED T6 5 hours: 2600 mAh battery, highlight mode 5 hours
2 LED L2 6 hours: 3800 mAh battery can work in high light mode for 6 hours (lighter than T6)
2 LED T6 3 hours: 1200 mAh battery, 3 hours in high light mode

3 Modes

Click the button on the bike light can switch the mode. Four clicks are High / Middle / Strobe / OFF in sequence.

360 degree rotation holder

Waterproof

Waterproof rate: IPX5 (small rain, Splash water)

Follow the steps

1200mAh Waterproof Taillight

Charging input: 5V/1A (Do not use 9V charger, it may damage the device) Working voltage: 3.7V/1A Luminous
color: red light
Modes: Strong-Marquee 1-Flash-Marquee 2-Breathing (long press for 2 seconds to shut down)
Product specifications: 94mm* 27mm* 25mm,
Waterproof rating: IPX5 (anti-rain, splash-proof）

Actual Show